Shell Malleus Grease OGH Shell Malleus Greases JB – Parsian Super Lubricants Shell Malleus Grease GL Superior Performance Open Gear. You are here: Home SHELL MALLEUS GREASE OGH (KG). Friday, 21 Dec Product Categories. Automotive Lubricants · ATF and Power Steering. MSDS Details. Product Name: Shell Malleus Grease OGH Product Code: Language: English Regulation: CHIP, 67//EEC Manufacturer: Shell Pakistan .
|Published (Last):||4 June 2012|
|PDF File Size:||12.93 Mb|
|ePub File Size:||20.63 Mb|
|Price:||Free* [*Free Regsitration Required]|
Examination of bolts The maloeus connection must be capable of maintaining a pre-designated preload during the entire life of the bearing. Therefore the bearing must always be greased liberally so that a collar of fresh grease forms around the whole circumference of the bearing gap and lip seals.
The lubricants are listed in alphabetical order. We recommend automatic gear lubrication. We assure you to have prepared this site with the utmost care. While in operation it must be assured that the wear limits of the bearing will not be reached.
Obtain confirmation of suitability from the lubricant manufacturer before using other lubricants. All the grease nipples must be easily accessible, lubrication lines must be provided if necessary. Bogie bearings for railway and tram vehicles as well as bearings for wind energy turbines are subject to special requirements, and ThyssenKrupp Rothe Erde should be contacted in such cases.
Exceeding the maximum permissible wear rates involves the risk of accidents and danger of life When reaching the wear limits the machine must be put out of operation. The properties must at least correspond to those of the igh listed in the table, and compatibility with the materials we use must be assured.
Shell Malleus OGH 0 open gear grease
Lubrication intervals for the gear We recommend automatic gear lubrication. Relubrication is absolutely essential before and after prolonged shutdown of the equipment.
Navigation Table of contents previous page next page. In addition, a sample of the used grease can be taken for analysis. Bearing rings and rolling elements to be taken to the relevant material recycling points. Lubrication and Maintenance CAUTION Risk of skin irritation caused by lubricants Safety gloves must be worn when handling lubricants Pay attention to the producer’s data All the grease nipples must be easily accessible, lubrication lines must be provided if necessary.
In the case of partially assembled bearings, or if there is a long period goh bearing installation and malleue commissioning, then appropriate maintenance procedures will be required, e. Disposal may involve environmental risks Follow the directives for waste disposal Mind the national laws. Relubrication of the raceway system The bearing should be rotated during relubrication until a fresh collar of grease is seen to form around the whole circumference of the bearing gaps and lip seals.
The bearing system and the gearing must be greased immediately after installation. Checking of the seal Check seals at least every 6 months, renew the seal if it is damaged.
When the bearing is put into operation, we recommend that tilting play or subsidence should be measured. This is the only way to achieve a satisfactory service life.
Grease, seals and plastic parts to be disposed of in accordance with waste guidelines.
Shell Malleus OGH 0 open gear grease
This is because the tooth flanks should always have sufficient grease applied relative to both the application and the duty. Effective lubrication is essential for the raceway system and the gearing. Exceeding the maximum permissible wear rates involves the risk of accidents and danger of life. The bearing should be rotated during relubrication. The only lubrication to be used on the raceway is KP2K grease, i.
We recommend repeating this measurement at suitable intervals. When cleaning the equipment, care must be taken to prevent cleaning agents or water from damaging the seals or penetrating into the raceways. Lubricants Queries about lubricants should be directed to the respective manufacturer.